2-positions 6-port injection valve bank (low-pressure)

PRODUCTS > LC Injection Valve > 2-positions 6-port injection valve bank (low-pressure)

2-positions 6-port injection valve bank (low-pressure)

The core of the two-positions 6-port injection valve is made of materials produced with self-developed core technologies and craftmanship, and the adjoining holes are connected to each other. The upper lid that touches liquid can be made of different materials suitable for diverse work scenarios. The key raw materials are all imported from overseas, and therefore the valve is suitable for all corrosive liquids like strong acid and alkali.
• Maintenance-free design that allows the valve to be used millions of times
• Small internal volume boosts the accuracy of test results.
• Valve core made of self-developed core technologies boasts low resistance and can withstand high corrosiveness, high temperature and abrasion.
• It can be electricity-driven or air-driven.
• Standard specifications: RS232/RS485, I/O communication interface.
• Input pressure: 0~2MPa (fluid), 0~1MPa (gas)

Application
The valve is extensively applied to the collection and distribution of liquid samples, environment-monitoring instruments, experimental analysis instruments, medical analysis instruments, chromatographic instruments etc.
Flow Passage Diameters1.5mm
Port Size1/4-28UNF
Liquid ContactsAIGIS-CV、PPS、PCTFE
Maximum Pressure2MPa(Fluid)
Port to Port Volume10uL
Liquid temperature1~150℃
Driving twisting force≤2.5N/m
Number of channels6
Initial positionThe initial position, which is channel-1 by default, will be automatically detected once the power is on
Rotation velocity≤4s/round
Communication interfaceRS232/RS485、I/O
Working voltage24 VDC ± 5% at 1.5 Amp max
Working temperature0~50℃
Environment humidity≤80%RH in non-condensation state